China Carp Fishing Planetary Gear Motor Rolling Gear manufacturer

Item Description

Carp Fishing Planetary Gear Motor Rolling Gear

PG36M555 DC Planetary Equipment Motor for Automated Television set rack

PG36M555 Sequence
Voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Velocity assortment: three 12 ≤140 3 12 ≤220 forty five twelve ≤350 6 24 ≤70 three 24 ≤110 45 24 ≤180 six-ninety nine.5K    Motor make sure you refer to the motor information RS-555123000.
          Gearbox you should refer to gearbox data reduction ratio99.5 .Connected to gearmotor output speed and torque please 
          refer to motor info. 
   2 Motor can be put in wiht magnetic encorder. encorder parameters you should refer to  me-37.htm .
   3Standard output shaft soon after lowering: 8.0mm. other measurements of then output shaft can make as shopper request.
   4Chart only for reference,goods shall prevail the entity.

Business Introduction

 

Application: Office Eqiupment
Dia.: 36X(84~110)mm
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Type: Circular Gear
Transport Package: CTN Size: 32X28xh26cm 40PCS/CTN G. W. 16kgs

###

Customization:

###

Gearbox data:
 
Number of stages 1stages reduction 2 stages reduction 3 stages reduction 4 stages reduction 5 stages reduction
Reduction ratio 3.7\5.2 13.7\19.2\26.9 50.9\71.2\99.5\139 188\264\369\516\721 669\977\1367\1911\2672\3736\
gearbox length " L" mm 26.4 32.6 38.9 45.3 52.5
Max.Running torque 3.0Kgf @ cm 6.0Kgf @ cm 8.0Kgf @ cm 12.0Kgf @ cm 20Kgf @ cm
Max. Gear breaking torque 9.0Kgf @ cm 18.0Kgf @ cm 24Kgf @ cm 36Kgf @ cm 60Kgf @ cm
Max. Gearing efficiency 90% 81% 73% 65% 59%

###

    Motor data:
 
Motor name Rated volt.v No load Load torque Stall torque
Current Speed Current Speed Torque Output power Torque Current
mA r/min mA r/min gf @ cm W gf @ cm mA
RS-555123000 12 ≤140 3000 ≤800 2200 150 3.3 600 3000
RS-555124500 12 ≤220 4500 ≤1200 3300 220 7.2 880 7800
RS-555126000 12 ≤350 6000 ≤2000 4500 300 13.5 1200 6000
RS-555243000 24 ≤70 3000 ≤400 2200 150 3.3 600 1600
RS-555244500 24 ≤110 4500 ≤600 3300 220 7.2 880 3000
RS-555246000 24 ≤180 6000 ≤1000 4500 300 13.5 1200 4000
       1\This table lists some motors parameters, others please refer to specific parameters of  rs-555.htm"
       2\Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X        gearing efficiency;output speed:motor speed / reduction ratio.

###

    NOTE:
   1\ Gearmotor named methods: e . g . SG-555123000-99.5K    Motor please refer to the motor data RS-555123000.
          Gearbox please refer to gearbox data reduction ratio99.5 .Related to gearmotor output speed and torque please 
          refer to motor data. 
   2\ Motor can be installed wiht magnetic encorder. encorder parameters please refer to  me-37.htm .
   3\Standard output shaft after reducing: 8.0mm. other sizes of then output shaft can make as client request.
   4\Chart only for reference,products shall prevail the entity.
Application: Office Eqiupment
Dia.: 36X(84~110)mm
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Type: Circular Gear
Transport Package: CTN Size: 32X28xh26cm 40PCS/CTN G. W. 16kgs

###

Customization:

###

Gearbox data:
 
Number of stages 1stages reduction 2 stages reduction 3 stages reduction 4 stages reduction 5 stages reduction
Reduction ratio 3.7\5.2 13.7\19.2\26.9 50.9\71.2\99.5\139 188\264\369\516\721 669\977\1367\1911\2672\3736\
gearbox length " L" mm 26.4 32.6 38.9 45.3 52.5
Max.Running torque 3.0Kgf @ cm 6.0Kgf @ cm 8.0Kgf @ cm 12.0Kgf @ cm 20Kgf @ cm
Max. Gear breaking torque 9.0Kgf @ cm 18.0Kgf @ cm 24Kgf @ cm 36Kgf @ cm 60Kgf @ cm
Max. Gearing efficiency 90% 81% 73% 65% 59%

###

    Motor data:
 
Motor name Rated volt.v No load Load torque Stall torque
Current Speed Current Speed Torque Output power Torque Current
mA r/min mA r/min gf @ cm W gf @ cm mA
RS-555123000 12 ≤140 3000 ≤800 2200 150 3.3 600 3000
RS-555124500 12 ≤220 4500 ≤1200 3300 220 7.2 880 7800
RS-555126000 12 ≤350 6000 ≤2000 4500 300 13.5 1200 6000
RS-555243000 24 ≤70 3000 ≤400 2200 150 3.3 600 1600
RS-555244500 24 ≤110 4500 ≤600 3300 220 7.2 880 3000
RS-555246000 24 ≤180 6000 ≤1000 4500 300 13.5 1200 4000
       1\This table lists some motors parameters, others please refer to specific parameters of  rs-555.htm"
       2\Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X        gearing efficiency;output speed:motor speed / reduction ratio.

###

    NOTE:
   1\ Gearmotor named methods: e . g . SG-555123000-99.5K    Motor please refer to the motor data RS-555123000.
          Gearbox please refer to gearbox data reduction ratio99.5 .Related to gearmotor output speed and torque please 
          refer to motor data. 
   2\ Motor can be installed wiht magnetic encorder. encorder parameters please refer to  me-37.htm .
   3\Standard output shaft after reducing: 8.0mm. other sizes of then output shaft can make as client request.
   4\Chart only for reference,products shall prevail the entity.

The Difference Between Planetary Gears and Spur Gears

A spur gear is a type of mechanical drive that turns an external shaft. The angular velocity is proportional to the rpm and can be easily calculated from the gear ratio. However, to properly calculate angular velocity, it is necessary to know the number of teeth. Fortunately, there are several different types of spur gears. Here’s an overview of their main features. This article also discusses planetary gears, which are smaller, more robust, and more power-dense.
Planetary gears are a type of spur gear

One of the most significant differences between planetary gears and spurgears is the way that the two share the load. Planetary gears are much more efficient than spurgears, enabling high torque transfer in a small space. This is because planetary gears have multiple teeth instead of just one. They are also suitable for intermittent and constant operation. This article will cover some of the main benefits of planetary gears and their differences from spurgears.
While spur gears are more simple than planetary gears, they do have some key differences. In addition to being more basic, they do not require any special cuts or angles. Moreover, the tooth shape of spur gears is much more complex than those of planetary gears. The design determines where the teeth make contact and how much power is available. However, a planetary gear system will be more efficient if the teeth are lubricated internally.
In a planetary gear, there are three shafts: a sun gear, a planet carrier, and an external ring gear. A planetary gear is designed to allow the motion of one shaft to be arrested, while the other two work simultaneously. In addition to two-shaft operation, planetary gears can also be used in three-shaft operations, which are called temporary three-shaft operations. Temporary three-shaft operations are possible through frictional coupling.
Among the many benefits of planetary gears is their adaptability. As the load is shared between several planet gears, it is easier to switch gear ratios, so you do not need to purchase a new gearbox for every new application. Another major benefit of planetary gears is that they are highly resistant to high shock loads and demanding conditions. This means that they are used in many industries.
Gear

They are more robust

An epicyclic gear train is a type of transmission that uses concentric axes for input and output. This type of transmission is often used in vehicles with automatic transmissions, such as a Lamborghini Gallardo. It is also used in hybrid cars. These types of transmissions are also more robust than conventional planetary gears. However, they require more assembly time than a conventional parallel shaft gear.
An epicyclic gearing system has three basic components: an input, an output, and a carrier. The number of teeth in each gear determines the ratio of input rotation to output rotation. In some cases, an epicyclic gear system can be made with two planets. A third planet, known as the carrier, meshes with the second planet and the sun gear to provide reversibility. A ring gear is made of several components, and a planetary gear may contain many gears.
An epicyclic gear train can be built so that the planet gear rolls inside the pitch circle of an outer fixed gear ring, or “annular gear.” In such a case, the curve of the planet’s pitch circle is called a hypocycloid. When epicycle gear trains are used in combination with a sun gear, the planetary gear train is made up of both types. The sun gear is usually fixed, while the ring gear is driven.
Planetary gearing, also known as epicyclic gear, is more durable than other types of transmissions. Because planets are evenly distributed around the sun, they have an even distribution of gears. Because they are more robust, they can handle higher torques, reductions, and overhung loads. They are also more energy-dense and robust. In addition, planetary gearing is often able to be converted to various ratios.
Gear

They are more power dense

The planet gear and ring gear of a compound planetary transmission are epicyclic stages. One part of the planet gear meshes with the sun gear, while the other part of the gear drives the ring gear. Coast tooth flanks are used only when the gear drive works in reversed load direction. Asymmetry factor optimization equalizes the contact stress safety factors of a planetary gear. The permissible contact stress, sHPd, and the maximum operating contact stress (sHPc) are equalized by asymmetry factor optimization.
In addition, epicyclic gears are generally smaller and require fewer space than helical ones. They are commonly used as differential gears in speed frames and in looms, where they act as a Roper positive let off. They differ in the amount of overdrive and undergearing ratio they possess. The overdrive ratio varies from fifteen percent to forty percent. In contrast, the undergearing ratio ranges from 0.87:1 to 69%.
The TV7-117S turboprop engine gearbox is the first known application of epicyclic gears with asymmetric teeth. This gearbox was developed by the CZPT Corporation for the Ilyushin Il-114 turboprop plane. The TV7-117S’s gearbox arrangement consists of a first planetary-differential stage with three planet gears and a second solar-type coaxial stage with five planet gears. This arrangement gives epicyclic gears the highest power density.
Planetary gearing is more robust and power-dense than other types of gearing. They can withstand higher torques, reductions, and overhung loads. Their unique self-aligning properties also make them highly versatile in rugged applications. It is also more compact and lightweight. In addition to this, epicyclic gears are easier to manufacture than planetary gears. And as a bonus, they are much less expensive.

They are smaller

Epicyclic gears are small mechanical devices that have a central “sun” gear and one or more outer intermediate gears. These gears are held in a carrier or ring gear and have multiple mesh considerations. The system can be sized and speeded by dividing the required ratio by the number of teeth per gear. This process is known as gearing and is used in many types of gearing systems.
Planetary gears are also known as epicyclic gearing. They have input and output shafts that are coaxially arranged. Each planet contains a gear wheel that meshes with the sun gear. These gears are small and easy to manufacture. Another advantage of epicyclic gears is their robust design. They are easily converted into different ratios. They are also highly efficient. In addition, planetary gear trains can be designed to operate in multiple directions.
Another advantage of epicyclic gearing is their reduced size. They are often used for small-scale applications. The lower cost is associated with the reduced manufacturing time. Epicyclic gears should not be made on N/C milling machines. The epicyclic carrier should be cast and tooled on a single-purpose machine, which has several cutters cutting through material. The epicyclic carrier is smaller than the epicyclic gear.
Epicyclic gearing systems consist of three basic components: an input, an output, and a stationary component. The number of teeth in each gear determines the ratio of input rotation to output rotation. Typically, these gear sets are made of three separate pieces: the input gear, the output gear, and the stationary component. Depending on the size of the input and output gear, the ratio between the two components is greater than half.
Gear

They have higher gear ratios

The differences between epicyclic gears and regular, non-epicyclic gears are significant for many different applications. In particular, epicyclic gears have higher gear ratios. The reason behind this is that epicyclic gears require multiple mesh considerations. The epicyclic gears are designed to calculate the number of load application cycles per unit time. The sun gear, for example, is +1300 RPM. The planet gear, on the other hand, is +1700 RPM. The ring gear is also +1400 RPM, as determined by the number of teeth in each gear.
Torque is the twisting force of a gear, and the bigger the gear, the higher the torque. However, since the torque is also proportional to the size of the gear, bigger radii result in lower torque. In addition, smaller radii do not move cars faster, so the higher gear ratios do not move at highway speeds. The tradeoff between speed and torque is the gear ratio.
Planetary gears use multiple mechanisms to increase the gear ratio. Those using epicyclic gears have multiple gear sets, including a sun, a ring, and two planets. Moreover, the planetary gears are based on helical, bevel, and spur gears. In general, the higher gear ratios of epicyclic gears are superior to those of planetary gears.
Another example of planetary gears is the compound planet. This gear design has two different-sized gears on either end of a common casting. The large end engages the sun while the smaller end engages the annulus. The compound planets are sometimes necessary to achieve smaller steps in gear ratio. As with any gear, the correct alignment of planet pins is essential for proper operation. If the planets are not aligned properly, it may result in rough running or premature breakdown.

China Carp Fishing Planetary Gear Motor Rolling Gear     manufacturer China Carp Fishing Planetary Gear Motor Rolling Gear     manufacturer
editor by czh 2023-01-23

Leave a Reply

Your email address will not be published. Required fields are marked *