Tag Archives: steel sprocket

China OEM Chain Sprocket Carbon Steel Gear worm gear motor

Item Description

We can make all types of gears according to clients drawing and specs ,specializing in non-regular items

>>Main Item
 Spur Equipment  
 Planetary Equipment   
 Metal Gears Small
 Gear Wheel
 Ring Gear
 Gear Shaft
 Helical Equipment
 Pinion Gear
 Spline Shaft                            .
 
Specifications:
 
one. Suitable for many kinds of transmission system.
 
two. Material and precision can be as specifications:
    metal, plastic, brass and many others.
 
three. Processing:
    solid,casting,heattreatment,or quenching and tempering carburization.
 
4. We have comprehensive equipment machining equipments: equipment hobbing device, shaving device, equipment
    shaper, equipment grinding device and heat treatment method heart,all of the generation process are strictly
    controlled by ourselves, we can certain the final items to meet your requirements.
 
5. Each processing,  strictly good quality control:
     ISO9001:2008.
 
six. Can manufacture all kinds of gears. 
 
A  Skilled on Drawing evaluation, Conference speaking about, software auditing, Pc & QC. 

 

Machining Equipments CNC center, CNC milling machine, CNC turning machine, CNC lathes,5 axis machine and so on.
Materials 1. Stainless Metal: SS201, SS303, SS304, SS316, SS416, SS420
two. Metal:C45(K1045), C46(K1046),C20
three. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200 (CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
five. Iron: 1213, 12L14,1215
six. Aluminum: Al6061, Al6063
seven.OEM according to your request
Processing Developing drawing, Opening mould/tooling, Precision machining (forging, Machining, Hobbing, Milling, Shaping, Shaving, Grinding, Warmth therapy.) Inspection, Packing and shipping and delivery
QC : Specialists self-verify in generation, closing-check out before bundle by expert Quality inspector
Heat Remedy Technique Carburizing, Induction, Flame, Nitriding, etc.
Main Devices NC equipment hobbing equipment, NC Equipment Shapers (Gealson, Moude), NC lathe, NC equipment Shaving devices, NC equipment millling, Nc equipment grinding Equipment. 
Surface End Anodize, Plating, Brushing, Sprucing, Blackened, Powder coating,   Sandblasting, Laser engraving and so forth.
Inspection Equipment CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin   gauge, Caliper gauge, Go meter, Go meter and many others.
Benefit Good quality first Support exceptional , Advanced gear,Knowledgeable employees, Excellent tests products
Application Health-related parts Machine parts Aerospace machinery parts Ships equipment elements Electrical areas Household furniture parts Kitchen area instruments Telecommunications, etc.

US $0.1-10
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cast Gear
Toothed Portion Shape: Bevel Wheel
Material: Stainless Steel

###

Customization:

###

Machining Equipments CNC center, CNC milling machine, CNC turning machine, CNC lathes,5 axis machine etc.
Materials 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200 (CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Processing Designing drawing, Opening mould/tooling, Precision machining (forging, Machining, Hobbing, Milling, Shaping, Shaving, Grinding, Heat treatment.) Inspection, Packing and shipping
QC : Technicians self-check in production, final-check before package by professional Quality inspector
Heat Treatment Method Carburizing, Induction, Flame, Nitriding, etc.
Main Machines NC gear hobbing machines, NC Gear Shapers (Gealson, Moude), NC lathe, NC gear Shaving machines, NC gear millling, Nc gear grinding Machines. 
Surface Finish Anodize, Plating, Brushing, Polishing, Blackened, Powder coating,   Sandblasting, Laser engraving etc.
Inspection Equipment CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin   gauge, Caliper gauge, Pass meter, Pass meter etc.
Advantage Quality first Service superior , Advanced equipment,Experienced workers, Perfect testing equipment
Application Medical parts; Machine parts; Aerospace machinery parts; Ships equipment parts; Electrical parts; Furniture parts; Kitchen tools; Telecommunications, etc.
US $0.1-10
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Cast Gear
Toothed Portion Shape: Bevel Wheel
Material: Stainless Steel

###

Customization:

###

Machining Equipments CNC center, CNC milling machine, CNC turning machine, CNC lathes,5 axis machine etc.
Materials 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200 (CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Processing Designing drawing, Opening mould/tooling, Precision machining (forging, Machining, Hobbing, Milling, Shaping, Shaving, Grinding, Heat treatment.) Inspection, Packing and shipping
QC : Technicians self-check in production, final-check before package by professional Quality inspector
Heat Treatment Method Carburizing, Induction, Flame, Nitriding, etc.
Main Machines NC gear hobbing machines, NC Gear Shapers (Gealson, Moude), NC lathe, NC gear Shaving machines, NC gear millling, Nc gear grinding Machines. 
Surface Finish Anodize, Plating, Brushing, Polishing, Blackened, Powder coating,   Sandblasting, Laser engraving etc.
Inspection Equipment CMM, Projection, Calipers, Micro caliper, Thread Micro caliper, Pin   gauge, Caliper gauge, Pass meter, Pass meter etc.
Advantage Quality first Service superior , Advanced equipment,Experienced workers, Perfect testing equipment
Application Medical parts; Machine parts; Aerospace machinery parts; Ships equipment parts; Electrical parts; Furniture parts; Kitchen tools; Telecommunications, etc.

Types of Miter Gears

The different types of miter gears include Hypoid, Crown, and Spiral. To learn more, read on. In addition, you’ll learn about their differences and similarities. This article will provide an overview of the different types of miter gears. You can also choose the type that fits your needs by using the guide below. After you’ve read it, you’ll know how to use them in your project. You’ll also learn how to pair them up by hand, which is particularly useful if you’re working on a mechanical component.
gear

Bevel gears

Bevel and miter gears are both used to connect two shafts that have different axes. In most cases, these gears are used at right angles. The pitch cone of a bevel gear has the same shape as that of a spur gear, except the tooth profile is slightly tapered and has variable depth. The pinions of a bevel gear are normally straight, but can be curved or skew-shaped. They can also have an offset crown wheel with straight teeth relative to the axis.
In addition to their industrial applications, miter gears are found in agriculture, bottling, printing, and various industrial sectors. They are used in coal mining, oil exploration, and chemical processes. They are an important part of conveyors, elevators, kilns, and more. In fact, miter gears are often used in machine tools, like forklifts and jigsaws.
When considering which gear is right for a certain application, you’ll need to think about the application and the design goals. For example, you’ll want to know the maximum load that the gear can carry. You can use computer simulation programs to determine the exact torque required for a specific application. Miter gears are bevel gears that are geared on a single axis, not two.
To calculate the torque required for a particular application, you’ll need to know the MA of each bevel gear. Fortunately, you can now do so with CZPT. With the help of this software, you can generate 3D models of spiral bevel gears. Once you’ve created your model, you can then machine it. This can make your job much easier! And it’s fun!
In terms of manufacturing, straight bevel gears are the easiest to produce. The earliest method for this type of gear is a planer with an indexing head. Since the development of CNC machining, however, more effective manufacturing methods have been developed. These include CZPT, Revacycle, and Coniflex systems. The CZPT uses the Revacycle system. You can also use a CNC mill to manufacture spiral bevel gears.
gear

Hypoid bevel gears

When it comes to designing hypoid bevel gears for miter and other kinds of gears, there are several important parameters to consider. In order to produce high-quality gearings, the mounting distance between the gear teeth and the pinion must be within a predefined tolerance range. In other words, the mounting distance between the gear teeth and pinion must be 0.05 mm or less.
To make this possible, the hypoid bevel gearset mesh is designed to involve sliding action. The result is a quiet transmission. It also means that higher speeds are possible without increasing noise levels. In comparison, bevel gears tend to be noisy at high speeds. For these reasons, the hypoid gearset is the most efficient way to build miter gears. However, it’s important to keep in mind that hypoid gears are not for every application.
Hypoid bevel gears are analogous to spiral bevels, but they don’t have intersecting axes. Because of this, they can produce larger pinions with smooth engagement. Crown bevel gears, on the other hand, have a 90-degree pitch and parallel teeth. Their geometry and pitch is unique, and they have particular geometrical properties. There are different ways to express pitch. The diametral pitch is the number of teeth, while circumferential measurement is called the circumference.
The face-milling method is another technique used for the manufacture of hypoid and spiral bevel gears. Face-milling allows gears to be ground for high accuracy and surface finish. It also allows for the elimination of heat treatment and facilitates the creation of predesigned ease-off topographies. Face-milling increases mechanical resistance by as much as 20%. It also reduces noise levels.
The ANSI/AGMA/ISO standards for geometric dimensioning differ from the best practices for manufacturing hypoid and bevel gears. The violation of common datum surfaces leads to a number of geometrical dimensioning issues. Moreover, hypoid gears need to be designed to incorporate the base pitches of the mating pinion and the hypoid bevel gear. This is not possible without knowing the base pitch of the gear and the mating pinion.

Crown bevel gears

When choosing crown bevels for a miter gear, you will need to consider a number of factors. Specifically, you will need to know the ratio of the tooth load to the bevel gear pitch radius. This will help you choose a bevel gear that possesses the right amount of excitation and load capacity. Crown bevels are also known as helical gears, which are a combination of two bevel gear types.
These bevel gears differ from spiral bevels because the bevels are not intersected. This gives you the flexibility of using a larger pinion and smoother engagement. Crown bevel gears are also named for their different tooth portions: the toe, or the part of the gear closest to the bore, and the heel, or the outermost diameter. The tooth height is smaller at the toe than it is at the heel, but the height of the gear is the same at both places.
Crown bevel gears are cylindrical, with teeth that are angled at an angle. They have a 1:1 gear ratio and are used for miter gears and spur gears. Crown bevel gears have a tooth profile that is the same as spur gears but is slightly narrower at the tip, giving them superior quietness. Crown bevel gears for miter gears can be made with an offset pinion.
There are many other options available when choosing a Crown bevel gear for miter gears. The material used for the gears can vary from plastics to pre-hardened alloys. If you are concerned with the material’s strength, you can choose a pre-hardened alloy with a 32-35 Rc hardness. This alloy also has the advantage of being more durable than plastic. In addition to being stronger, crown bevel gears are also easier to lubricate.
Crown bevel gears for miter gears are similar to spiral bevels. However, they have a hyperbolic, not conical, pitch surface. The pinion is often offset above or below the center of the gear, which allows for a larger diameter. Crown bevel gears for miter gears are typically larger than hypoid gears. The hypoid gear is commonly used in automobile rear axles. They are useful when the angle of rotation is 90 degrees. And they can be used for 1:1 ratios.
gear

Spiral miter gears

Spiral bevel gears are produced by machining the face surface of the teeth. The process follows the Hertz theory of elastic contact, where the dislocations are equivalent to small significant dimensions of the contact area and the relative radii of curvature. This method assumes that the surfaces are parallel and that the strains are small. Moreover, it can reduce noise. This makes spiral bevel gears an ideal choice for high-speed applications.
The precision machining of CZPT spiral miter gears reduces backlash. They feature adjustable locking nuts that can precisely adjust the spacing between the gear teeth. The result is reduced backlash and maximum drive life. In addition, these gears are flexible enough to accommodate design changes late in the production process, reducing risk for OEMs and increasing efficiency and productivity. The advantages of spiral miter gears are outlined below.
Spiral bevel gears also have many advantages. The most obvious of these advantages is that they have large-diameter shafts. The larger shaft size allows for a larger diameter gear, but this means a larger gear housing. In turn, this reduces ground clearance, interior space, and weight. It also makes the drive axle gear larger, which reduces ground clearance and interior space. Spiral bevel gears are more efficient than spiral bevel gears, but it may be harder to find the right size for your application.
Another benefit of spiral miter gears is their small size. For the same amount of power, a spiral miter gear is smaller than a straight cut miter gear. Moreover, spiral bevel gears are less likely to bend or pit. They also have higher precision properties. They are suitable for secondary operations. Spiral miter gears are more durable than straight cut ones and can operate at higher speeds.
A key feature of spiral miter gears is their ability to resist wear and tear. Because they are constantly being deformed, they tend to crack in a way that increases their wear and tear. The result is a harder gear with a more contoured grain flow. But it is possible to restore the quality of your gear through proper maintenance. If you have a machine, it would be in your best interest to replace worn parts if they aren’t functioning as they should.

China OEM Chain Sprocket Carbon Steel Gear     worm gear motorChina OEM Chain Sprocket Carbon Steel Gear     worm gear motor
editor by czh 2022-12-14

High factory made in China – replacement parts – in Bhopal India Quality Steel Double Row Teeth Chain Sprocket with top quality

High  factory  made in China - replacement parts -  in Bhopal India  Quality Steel Double Row Teeth Chain Sprocket with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Item specification
one.Materials:C forty five# steel ,stainless steel or EPT needed supplies.

2.Sprockets can be manufactured according the customer’s drawings

three.Warmth remedy: Hardening and Tempering, Higher Frequency Quenching, Carburizing Quenching and so on in accordance the specifications..

4. Inspection: All products are checked and analyzed extensively during each and every functioning treatment and right after generation will be reinspected.

About us
HangZhou EPT Sprocket Co., Ltd. is a expert company of a variety of sprocket wheels, stainless steel sprocket wheels, non-standard sprocket wheels, large pitch sprocket wheels, coupling sprocket wheels, spur gears, timing belt wheels, equipment racks, umbrella Gear, worm gear, shaft, sleeve and EPT transmission elements companies. And according to client drawings, samples, measurement processing custom made creation. The company integrates design and style R & D, manufacturing and product sales. In accordance with rigorous generation, inspection and top quality standards, the business has proven a thorough top quality technique, creation approach and excellent quality control. The company’s sprocket goods are of large high quality, stability and durability.

The business now has 80 sets of different high-precision CNC lathes, equipment hobbing equipment, gear shapers, tempering furnaces, quenching tools, gantry planers, common milling, sawing equipment, vertical broaching machines, hydraulic equipment and EPT processing equipment, with an annual creation potential of 2 million parts . Carburizing and quenching, nitriding, quenching and EPT heat treatment method, surface area blackening, galvanizing, electrophoresis, and so forth. At the same time, it also has large-precision tests equipment these kinds of as: Rockwell hardness tester, Vickers hardness tester, metallographic microscope, picture measuring instrument, Magnetic particle flaw detectors, and so forth. The merchandise produced are extensively employed in metallurgy, steel, chemical, textile, agricultural machinery, 3-dimensional garages, packaging machinery, chemical machinery, pharmaceutical equipment, industrial and mining equipment and EPT industries. The product indicators meet the needs of importing similar goods and are exported to Hong Kong and ZheJiang , Southea EPT Asia, Europe, The usa, the Middle Ea EPT and EPT locations, and are deeply trustworthy and praised by buyers.

FAQ
Q: Are you investing company or company ?
A: We are manufacturing unit.

Q: How long is your delivery time?
A: Usually it is 5-10 days if the items are in inventory. or it is fifteen-20 times if the goods are not in inventory, it is in accordance to quantity.

Q: Do you offer samples ? is it cost-free or additional ?
A: Indeed, we could provide the sample for free of charge demand but do not pay out the co EPT of freight.

Q: What is your terms of payment ?
A: Payment thirty%TT in advance. 70% T/T just before shippment.

Q:What`s the MOQ of your products?
A:1 set,we can also deal with the sample get. and the big-quantity.

We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original products manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our business and the detailed substitute parts contained herein are not sponsored, accepted, or made by the OEM.

High  factory  made in China - replacement parts -  in Bhopal India  Quality Steel Double Row Teeth Chain Sprocket with top quality

High  factory  made in China - replacement parts -  in Bhopal India  Quality Steel Double Row Teeth Chain Sprocket with top quality

High  factory  made in China - replacement parts -  in Bhopal India  Quality Steel Double Row Teeth Chain Sprocket with top quality

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Alloy 25200 K2 Marsh Buggy Chain | Marsh Buggy Track ChainCarbon in Warsaw Poland Steel Leaf Chain – BL534, LL1688, LH2466 with ce certificate top quality low price

Marsh Buggy Track ChainCarbon in Warsaw Poland Steel Leaf Chain – BL534, LL1688, LH2466 with ce certificate top quality low price”>

We – EPG Team the greatest Chain and agricultural gearbox manufacturing unit in China with 5 diverse branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Our firm pays distinct interest to customers’ needs, listening to the particular demands of every single client and guaranteeing overall satisfaction.As Keeping in mind that very good support is the key to cooperating with customers, we attempt to satisfy substantial top quality standards, provide aggressive prices and guarantee prompt delivery. a outcome, we have become a comprehensive manufacturer in the motion and control subject supplying an in depth lineup of goods with outstanding sturdiness, surroundings-friendliness, and top quality. We’ve constructed up our solution range to respond to the vastly various situations found in distinct industrial environments close to the entire world. From heavy market to precision producing, we operate with end-end users in practically each industry and have expert remedies which are established to provide a distinct overall performance benefit for your software. Alloy/Carbon Steel Leaf Chain – BL534,LL1688,LH2466
A. Our Providers

1. Any of your variety inquiry leaf chain would be replied in 24 several hours.

two. Well-skilled and knowledgeable income staffs will reply all your considerations in fluent English.
three. OEM services are accessible with us, our expert designer would make your non-public idea into getting.

4. Defense of your income spot, tips of design and all your non-public information.
five. Shipping and delivery by air mail or ship for your orders.
6. With years of manufacture and marketing experience in global marketplace, provides you revenue and great success!

B. Approach Parameter 

C. Firm show & Product approach

D. Packaging 

Packaging Specifics: Chain+Plastic Bag+ EPT Box+Wood case+Large Carton+Metal Pallets
Supply Element: six months

E. FAQ
1. Are you producer or trade Company?

We are a manufacturing unit started in 1991 with trade crew for worldwide services.

 

two. What phrases of payment you typically use?
T/T thirty% deposit and 70% yet again EPT doc, Western Union, L/C at sight

 

three. what is your direct time for your items?
Normally 45 days right after verified get. thirty days could be available in minimal period for some objects (in the course of Might to July), and sixty five times during new calendar year and hot year ( Jan to March).

 

four. Do you go to any Show?
We show up at Hannover display in Germany, N EPT in Austrilia, Canton reasonable, PTC, in China and many EPT unique household furniture exhibits.

 

five. Do you have any immediate chat ?

 

The use of original products manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the shown alternative parts contained herein are not sponsored, accredited, or created Marsh Buggy Track ChainCarbon in Warsaw Poland Steel Leaf Chain – BL534, LL1688, LH2466 with ce certificate top quality low price”>

<img src="http://img.hzpt.com/banner/chain1.jpg" alt="Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Alloy 25200 K2 Marsh Buggy Chain